Activator-SS™ is a liquid activator that will allow metals to plate over stainless steel. This solution will activate the steel in preparation for gold plating. Room temperature, 4-6 volts, 60-90 seconds. Platinized titanium anode.
Activator-T™ is mixed with water as needed producing a mild acid with super etching, brightening, and cleaning properties. Activator-T chemically cleans and activates your parts to assure strong metallic bonding for the initial plate and continuous plating processes. Dissolve 1/3 lb. per gallon of water. Use at room temperature for 30-60 seconds. No rectifier required. MSDS
Black-Free™ is a black antique plating solution which is used over many different metals. The solution plates a rich black coating which is easily relievable with minor abrasion. After the article is plated, then the high spots are relieved to give the final antique look. Great alternative to flammable and toxic black lacquer dipping baths. Heat to 120-140°F, plate at 3-4 volts for 30 seconds -2 minutes. Stainless anode. MSDS
Brass Release™ coats brass items with a micro-inch of stick-free metal allowing parts to be easily removed after rubber molding. Just turn the mold over and the parts will fall right out! Just dip the parts in Brass Release™, rinse, dry and then your parts are ready to be molded without the need for any spray release agents. Immerse items for 2-3 minutes before rubber molding.
Copper Mirror™ is a bath that will deposit a consistent uniform, brilliantly bright and shiny copper over dull surfaces in just 2-10 minutes. Air agitation needed. Use at room temperature, 2-3 volts, pure copper anode.
Copper Primer™ plates a consistent uniform copper deposit in a solution that is easy to use. It can be used as a pre-plate to go over difficult to plate metals as well as a bonding metal between plating stages. Heat to 130°F, 1-2 volts for 2-5 minutes. Pure copper anode. MSDS
EARTHCOAT™ Gold Plating Solutions Gold Plating Solutions produce beautiful gold colors with a total cyanide-free technology. The plating is durable and wear resistant and produces uniform gold colors in 14K, 18K, 24K, and Rose colors. Available in bath and pen plating solutions. Bath plating-heat to 140°F, plate 3-4 volts for 30-45 seconds. Stainless anode. MSDS PEN MSDS
ElectroKing™ is an excellent soak cleaner and electrocleaner for many substrates in the jewelry and industrial industry. Simply mix 1/4 lb powder per gallon and start cleaning by simple immersion or electrocleaning. Heat to 140°F, 2-6 volts, 15-60 seconds, stainless anode. MSDS
Make nonconductors such as plastic, ceramic, cardboard, and leather conductive for Plating and Electroforming.
Metalform-A™ is an acrylic based, non-hazardous and non-flammable copper conductive paint that can be brushed on or dipped. Requires 2-4 hours of drying time. Available in 1 and 6 ounce jars.
Metalform-L™ is a lacquer based conductive paint. Requires a disposable pressured air cartridge. Cartridge sold separately. (Hazardous shipping) Available in 4 ounce jars.
Nickel-Free™ is an ecological, completely cyanide-free, nickel-free, and hypo-allergenic white depositing plating solution. Nickel-Free™ deposits a specially formulated alloy similar in color to nickel, achieving a decorative hard metal barrier between bright copper and final finishes such as gold and silver. Heat to 130-150°F, plate at 2-3 volts for 30-90 seconds. Platinized titanium anode. MSDS
Nickel Mirror™ plates a consistent, uniform nickel deposit that is easy to operate and maintain. It deposits brilliantly bright and shiny Nickel over dull surfaces within 10-15 minutes, over Copper Mirror™ in just 3 minutes. As a pre-plate, it enhances and brightens your rhodium, gold, and silver plating finishes. Heat to 140°F, 2-4 volts, 1-10 minutes. Nickel anode/platinized titanium anode. MSDS
PALLABRITE™ MIRROR is a maintenance free ready to use palladium plating bath purposely designed for flash plating over white metals. This product produces a consistent bright white mirror finish that is tarnish resistant. Can be used as an intermediate layer over gold, silver, palladium, and platinum or as a final plate over low end jewelry. An excellent pre-plate to save money on rhodium plating. 2.5 grams per quart bottle. Heat to 125°F, 2-3 volts, 15-30 seconds. Platinized titanium anode. MSDS
Platinum Pen plating solutions come in 1 ounce jars. Touch up your platinum jewelry with this solution. Use with a pen plater.
Silver-Free™ will reflect the surface of its underplate. You will plate shiny silver over shiny metals and matte silver over dull surfaces. Plate at room temperature, Plate at 1.5-1.8 volts for 15-90 seconds. Stainless or pure silver anode.
Strip-Free™ is a process where you can strip gold plated surfaces without using cyanide. You simply reverse plate the item and within 20-40 seconds the gold plated surface is removed and dissolved into solution. The surface under the gold is not affected. (not to be used with sterling silver) Heat to 120-150°F, reverse plate at 3-6 volts, 30-90 seconds. Stainless anode.
ULTRASONIC-ECO™ is an aqueous cleaner that provides excellent degreasing properties when used in tumbling, ultrasonic or standing heated tanks. Biodegradable and Non-Hazardous. Mix 1 part concentrate with 10 parts water. Heat to 120-140º F, clean items for 15-60 seconds.
White-Free™ deposits a beautiful bright and white finish resembling bright silver. White-free will reflect the texture of the surface it is coating. Helps prevent tarnishing. Can be plated over nickel and nickel-free. Plate at room temperature, 2-4 volts for 30-60 seconds. Stainless anode.
